|
Auction Highlights:
WHEEL LOADER
2006 Caterpillar 930G Wheel Loader, Cab w/ A/C & Heat, Quick Coupler, 3rd Valve, 20.5-R25 Tires, Hour Meter Shows 13,500
LOADER/ BACKHOES
2007 Caterpillar 420E 4WD Loader/ Backhoe, Extendahoe, Deluxe Cab w/ A/C & Heat, Pilot Controls, Wiper Package, Light Package, 24" Hoe Bucket, Hour Meter Shows 2177
Case 580 K Loader/ Backhoe, EROPS, 24" Hoe Bucket
BOOMLIFTS
2009 Genie S120 4x4x4 Boomlift, New Inspection, Perkins 4-Cylinder Diesel, 126 Ft. Working Height, 4-Section Boom, Extendable Axles, 4-Wheel Steer, 90% Foam Filled Tires, 750 lb. Capacity Basket, 3000 Watt Generator, Alarm Package, 2-Speed Wheel Motors, Positive Traction Drive, Hour Meter Shows 5131
2000 Genie S-60 4WD Boomlift, Dual Fuel, 60 Ft. Reach, Inspected In Shop 0n 4/28/18, 6358 Total Hours, 1981 Hours On New Engine, s/n: S60-6130
MOBILE HAMMER
2001 Arrow Master 1350 Mobile Drop Hammer, Ex City Unit, John Deere Diesel, 80 HP, Enclosed Cab, New Hammer Valve, 12"x12"x 36" Tamper Tool, Optional Tool Holder w/ Tapered Asphalt Cutter. Has Been Through Shop, Excellent Condition, Hour Meter Shows 1501
FORKLIFTS
2001 Eagle Picher RC60 Forklift, 6000 lb. Capacity, Perkins Diesel, 216" Lift Height, 3-Stage Mast, Side Shift, 48" Forks, 1174 Actual Hours, Recently Serviced
2006 Lift King 6000 lb. Diesel Forklift, 4-Speed Manual Transmission, 14 Ft. Lift Height, 6 Ft. Forks, Fork Positioning, New Seat, Hour Meter Shows 1720
Toyota 4000 lb. Propane Forkift, Solid Tires
SERVICE TRUCKS
2004 Freightliner M2 S/A Service Truck, MBE900 6.4L Diesel Engine, 230 HP, 6-Speed Allison Automatic, Air Brakes, Non CDL, 26,000 lb. GVWR, Auto Crane 6006H Hydraulic Crane, Ingersoll Rand Air Compressor, Miller Diesel Welder, Hydraulic Outriggers, 12 Ft. Flatbed, Toolboxes, Hose Reels
1998 International S/A Crew Cab Service Truck, DT466E, 230 HP, Eaton 9-Speed Transmission, Air Bakes, 33,000 lb. GVWR, IMT 5016 Hydraulic Crane, 12 Ft. Service Body, Low Miles, Low Hours
DUMP TRUCKS
2004 International 4200 S/A Dump Truck, Ex City Unit, VT365 Engine, New Out Of Frame Allison Automatic, Air Brakes, Galion 10 Ft. Dump Box w Manual Tarp, Cruise Control, Air Conditioning, 59,000 Original Miles
2005 International M2 S/A Dump Truck, Caterpillar C7 Acert, 207 HP, Allison MD3060 Transmission, Air Brakes, 10 Ft Dump Box w/ Manual Tarp, Non CDL, 26,000 lb. GVWR, Cruise Control, Air Conditioning, 68,000 Original Miles
FLATBED TRUCK
2002 Freightliner FL60 S/A Flatbed Truck, Cummins ISB, 285 HP, Allison 6-Speed Transmission, Air Brakes, Non CDL, 26,000 lb. GVWR, Air Brakes, Air Conditioning, 172" Wheel Base, 10,508 Original Miles
VAN BODY TRUCKS
2013 Ford F450 16 Ft Van Body Truck, 6.8L, V10, Automatic, Air Conditioning, 2,000 lb. Liftgate, Morgan 16 Ft. By 96"" Box, 76,000 Miles
2006 International 4300 S/A Van Body Truck, DT466, 245 HP, Engine Brake, Eaton/ Fuller 6-Speed Transmission, 24 Ft. Box, Non CDL, Air Brakes, Air Conditioning, 3,000 lb. Liftgate
2009 International 4400 T/A Refrigerated Van Body Truck, MaxForce Diesel, 260 HP, Allison Automatic Transmission, 26 Ft. Box, Hydraulic Liftgate, 294K Miles"
MOTORCYCLE
’00 HD DynaW/Glide 3,077 actual miles W/Custom Rodeo Paint- This One of Kind Bike was Commissioned by Diamond G Rodeo, Airbrush Painted By GM Bootleg of Chino CA. 5 – Individual Airbrushed – Incredibly Life Like Images – Of Famous National Finals Rodeo Cowboys, Their Horses and Championship Bulls. Very Low Miles 3,077 Original miles, Screaming Eagle Intake – Corbin double seat, back rest and high bar – leather saddle bags, Q/R windshield – forward pegs – engine guard – tank concho & pouch – All chrome hand controls, Beautiful Bike – Must See to Appreciate.
TANKER TRAILER
1991 Beall Tri-Axle Aluminum Tanker Trailer, 9200 Gallon Capacity, 2-Compartment, Insulated
TENSIONING & REEL TRAILERS
’89 SAUBER 1520 2-REEL TRAILER TENSION BRAKES & HYD. DRIVE- single axle, 12,500 GVWR, 10,000lb capacity, 2 reel positions with tensioning brakes 16? , hydraulic Honda engine driven power pack for hydraulic take up retriever, 72? x 56? reel dimensions, 2-rear jack stands, tongue jack with wheel, 10 x 15 tires @80%, empty weight 3100 lbs., 2? trailer sides and rear tailgate, 96? wide, 18? length, newer white paint and been through the shop.
'93 HOGG DAVIS STELLAR HOG REEL TRANSPORTER W/REEL MODULE- Deutz FL2011 diesel engine, hydraulic drive motor, self powered, self maneuvering, towable, hook lift self load/unload, hydraulic reel lift, will transport reel or load up to 20,000lbs, comes with one reel pallet module that holds reel 96 to 130 in diameter, 84? reel width, has remote control, 40,780GVWR, 5? tongue, pintle hitch, been through the shop, newer paint and job ready………
3-REEL SELF LOADING CARRIER WITH EXTRA CARRIER- 3 reel self loading trailer, tandem axle, new paint, independent hydraulic lifts at each reel tower, electric start engine driven power pack, multi bank valve, auxiliary capstan winch, 6000 lb. reel capacity @ each location, GVWR 19,200 lbs., 59? wide x 80? diameter reel size……."
Hydraulic Reel Trailers
Cable Reel Trailers
ASSORTED TRAILERS
1999 Twamco 24 Ft. Equipment Trailer, Tilt Deck, 15-Ton Capacity, 24 Ft. By 8 Ft. Deck, Electric Brakes, Fold Down Ramps, 36' Deck Height
2006 Delta T/A Cargo Trailer, 6 Ft. By 16 Ft. Side Door, 7,000 lb. GVWR"
Enclosed Cargo Trailers
Equipment Trailers
STORAGE CONTAINERS
20 Ft. & 40 Ft. Steel Storage Containers
TOWABLE EQUIPMENT
Towable Light Towers
Towable Message Boards & Arrow Boards
UTILITY BEDS, WATER TANKS, DUMP BEDS
Assorted Truck Utility Boxes, Various Sizes
Flatbed Decks, Various Sizes
Water Tanks
Bucket Truck Beds
Assorted Dump Beds
CRANES & ATTACHMENTS
Liftmoore Truck Cranes
Great Assortment Of Fork Attachments To Fit Wheel Loaders
Snowplows To Fit Wheel Loaders
Assortment Of Wheel Loader Buckets
Buckets To Fit Skid Steer Loaders
Snowplows To Fit Large Trucks
Backhoe Buckets
Slide-In Sander Spreaders For Large Trucks
PAINT BOOTH
Ordered but never installed. Still in crating, 14? door height FRONT FLOW/CROSS FLOW. External dimensions: 34? 5? long x 16? 6? wide x 15? 4? high. Large interior space: 15? x 16? x 34? inside. M6 x 4.4 I-beam supports. Comes with 9? chimney kit and electrical kit. All panels are air-tight, 18 gauge galvanized unpainted sheet metal fastened with 5/16? bolts. All panels have 2? flanges with pre-punched holes for easy nut-and-bolt assembly. Gabled roof design gives better air flow, lighting and overall strength. (18) 48? four-tube fluorescent light fixtures with clear, tempered glass and seals. – bulbs are included. 42? diameter tubeaxial fan with aluminum spark-proof blades. Fan motor is 3 phase 208/240/480 volt, 24,000 c.f.m. @ .5? static pressure. 7.5 hp. Booth uses 20? x 20? intake filters. All quality components proudly made in the USA! Col-Met design Meets NFPA 33 & OSHA 1910 guidelines. (check your local codes for local permit requirements) Equipped with Dwyer manometer draft gauge for exhaust filter monitoring and exhaust filters (48 intake@1? pad-42 exhaust@2? pad) included.
SHOP EQUIPMENT
Clean Burn Oil Heater
Metal Shop Lathes
Floor Drill Press
Horizontal Metal Cutting Bandsaw
Bead Blasting Cabinet
Shop Hoists
Roll-Away Toolboxes
Flammable Parts Cabinets
Shop Vacuums
Great Assortment Of Power Tools, Hand Tools
Hub Sockets, Socket Sets, Wheel Pullers, Automotive Tools
Inspection Calipers & Equipment
Pneumatic Impacts
Hydraulic Porta-Powers
Hydraulic Pallet Jacks
Shop Fans & Space Heaters
2-Wheel Dollies
Hardware Bins w/ Inventory
Industrial Metal Shelving
Pedestal Grinders
Metal Work Benches
Assorted Vises
Sandblasters
Steel Pallet Racking
Cantilever Racks
Scrap Metal Inventory
Hose Reels
AUTOMOTIVE EQUIPMENT
Hydraulic Floor Jacks
Jack Stands, Hydraulic Bottle Jacks
Good All Jump Start Unit, Booster Starting
Automotive Lubesters, Oil Drains
AIR COMPRESSOR
Ingersoll Rand 175 CFM Utility Air Compressor, Diesel
AUTOMOTIVE PARTS INVENTORY
Parts Room Consisting Of New & Rebuilt Automotive & Equipment Parts: Engines, Starters, Alternators, Valves, Etc.
New Tire Inventory Consisting Of: Motor Grader, Wheel Loader & Trucks
Engines, Transmissions & Various Truck Parts
New Automotive Inventory Consisting Of: Oils, Antifreeze, Etc.
CONTRACTING EQUIPMENT
Honda Generators & Other Manufacturers
Fiberglass & Aluminum Ladders
Chain Binders, Come-Alongs & Load Chains, Various Sizes
WELDING EQUIPMENT
Miller 55D Diesel Skid Mounted Welder
Miller 400 Airpak Skid Mounted Diesel Welder
Miller Wire Feed Welders
Ox/ Acet Torch Sets
ANTIQUES
Variety Of Antique Decorator Toys, Fuel Pump, Cash Register,
Furniture
OFFICE FURNITURE
Office Furniture Consisting Of: Desks, Chairs, Bookcases
Inspection:
October 8th, 9th and 10th from 9:00am – 4:00pm at the auction location in Casper, WY. Please do your due diligence during inspection to determine what will be needed for removal. If you have any questions at all, please contact us prior to bidding. We urge you to conduct a thorough inspection of all items before placing any bids. All Items are sold AS-IS WHERE-IS with NO guarantees.
Directions:
From I-25 take exit 186 toward US-20 E and merge onto East Street.
Turn south on Bryant Stock Trail (it will become N Beverly St).
Head east on Hwy 20. Once you cross over I25, the auction location is your second left after the U-Haul Dealer.
Terms & Conditions:
INSPECTION: October 8th, 9th and 10th from 9:00am – 4:00pm at the auction location in Casper, WY. Please do your due diligence during inspection to determine what will be needed for removal. If you have any questions at all, please contact us prior to bidding. We urge you to conduct a thorough inspection of all items before placing any bids. All Items are sold AS-IS WHERE-IS with NO guarantees.
CREDIT CARD TERM: A $25 credit card authorization will be processed when submitting your first bid. The $25 is simply a pending hold on your card and is held by the credit card company for varying lengths but typically 24-72 hours. This $25 authorization is not actually charged to your card and if you are the winning bidder that payment will be a completely separate transaction. If you do not win any bids there will be no charges against your account. Your credit card information on file will need to be correct. Update your information through the REGISTER HERE / UPDATE OR LOST BIDDER NUMBER link at the top of this page.
BUYERS PREMIUM: There will be a 13% buyers' premium (10% if paying in cash or equivalent) added to all winning bid prices and is subject all applicable sales tax.
PAYMENT TERMS: Payment is due by 4:45pm on Tuesday, October 16th. If you'd like to have your card charged after the auction by Roller personnel and a paid receipt sent to you, please respond to the invoice email with your desire to have your card on file charged. We will not process your card without your email consent. You may pay online or at our office in Denver on October 12th, 15th and 16th from 8:15am - 4:45pm. Payments will be accepted in Visa, MasterCard, Discover, cash, bank wire transfer, cashier check, personal/company check approved by TeleCheck or accompanied by a letter of guarantee from the bank. (Payments in cash, bank wire transfer, cashier check or check with a letter of guarantee from the bank will receive a 3% reduction off of the buyer’s premium.) No payments will be taken at the auction location in Casper, WY.
RE-LISTING FEE: If your auction purchases are not paid for by the specified deadline the credit card on file will be charged a re-listing fee of 10% of the total bid price(s), or $10, whichever is greater (not to exceed $100). Those individuals not paying will not be permitted to participate in future auctions.
REMOVAL: All purchases must be removed at buyer’s expense and responsibility on October 15th, 16th and 17th from 9:00am – 4:00pm at the auction location in Casper, WY. No weekend removal. If items are not removed by 4:00pm on Wednesday, October 17th, a $25 fee will be charged. All items not picked up by the removal deadline are considered abandoned and bidders may not have access to said items or be permitted to participate in future auctions. We schedule our crews based on these dates so if you're unable to pick up within these time frames please do not bid.
All tools that may be required for disassembly and removal of auction items is the sole responsibility of the buyer. Please do your due diligence during inspection to determine what will be needed. If you have any questions at all, contact us prior to bidding.
It is the buyers’ responsibility to pick up all purchased lots. Roller personnel is there to assist/locate items but not to verify all items have been picked up. We will attempt to assist with this, but it is ultimately the responsibility of the buyer.
TITLES / TAXES: Applicable sales tax will be added to all purchases except the following Exemptions: Dealers re-selling similar equipment with a valid retail sales tax license & businesses with tax-exempt status (we must have a copy of your current license on file). Items being exported will have the taxes refunded if we get a dock receipt within 2 weeks of the auction. The tax rate for this auction is 5.00%.
Wyoming Temporary Tags and Permits will be issued For All Titled Units By Trout Machinery (Who is a Wyoming Licensed Motor Vehicle Dealer).
All Titles will be sent out 15 Business Days after the auction.
All information provided is believed to be correct but NO warranty as such is either intended or implied. All items are sold AS IS - WHERE IS AND WITH ALL FAULTS AND DEFECTS THEREIN.
|
